Spa experience can be vivid especially if the spa is installed at your home. The inexplicable comfort that jets of water released from spas give to users is really exciting. The water-stream can really relax you and keep you healthy. Walking into spas and focusing on quieter form of exercise can be done at home with much ease. It is just that the spa that you use needs to be fitted with filters so that jets of water released is crystal clean. Doughboy spa products can be very good for your spa. The replacement filters can really bring difference in your spa experience as all dirt particles are trapped and the dirt ridden cartridge can be replaced with a new one.
Using Hot spring spas or Gulf coast spas can be very pragmatic as they can be used to filter out dirt matter to exalt its purity and serenity. Your spa can then become your masseuse, where you can also enjoy the gifts of aromatherapy and sauna in one setting. In your privacy, the spa leaves you refreshed and started for the day. Moreover, there are not much concerns of keeping it clean as just by replacing the cartridge keeps it ideally fit for use on a continuous basis. Hot or cold showers with the built-in spa jets can give you the greatest comfort and keep you fit in working days. So, using the spa can really become a thrilling and an exciting activity with the use of right kind of filters.
Posts Tagged ‘filters’
Filters can Make your Spa, a vivid experience
Thursday, July 1st, 2010Methodology for cleaning of pool filters
Thursday, June 10th, 2010The filters of brands like Baker Hydro and Harmsco when installed in a pool get clogged after some days of use. Then the concern is to clean it for future usage. There are many cleaning methods that are in place for cleaning the filters. Starting from washing the cartridge with water to keeping it immersed in a solution of acid becomes essential for complete cleaning. The hose connected with a water source can be used to spray water in the cartridge. This cleans a lot of dirt that accumulates on the surface of the cartridge. But this will not be enough as oily substances need to be treated with solutions of acids. For this reason, I would suggest that you prepare a Chlorine solution and keep the cartridge immersed for some time. This will kill all the micro-organisms on the cartridge surface. Then wash it again with water and re-immerse it, this time, in a solution of muriatic acid. If necessary keep it soaked overnight. The acid will react with the mineral elements and will dissolve them. So, your cartridge will become free from all extraneous materials by following these procedures.
This new method of cleaning is much morcartridges cleaning methodse advantageous in comparison to the conventional cleaning methods where one has to backwash the accumulated dirt. The filament used to build the cartridge is made of a superior material more commonly known as polyesters. This material can easily filter out tiny particles that can only be seen in microscopes. The efficiency of filtration thus becomes much more pronounced with this type of filters.
